Filament · Infographic
3D printer filament at a glance
PLA, PETG, ABS, ASA, TPU and nylon side by side: the makers' nozzle and bed temperatures, heat resistance and density, with every figure sourced and dated.
The graphic above puts six common FDM filaments side by side using figures the makers publish. Different brands give different ranges, so always use the figures printed on your own spool or the maker's page. Text version:
| Material | Nozzle | Bed | Heat resistance (maker's figure) | Density | Enclosure |
|---|---|---|---|---|---|
| PLA (Prusament PLA) | 210 ± 10 °C | 40–60 °C | 55 °C | 1.17 g/cm³ (Polymaker PolyLite PLA) | Not required |
| PETG (Prusament PETG) | 250 ± 10 °C | 80 ± 10 °C | 68 °C | 1.25 g/cm³ (Polymaker PolyLite PETG) | Not required |
| ABS+ (eSUN ABS+) | 230–270 °C | 95–110 °C | Not compared here | 1.04 g/cm³ (Polymaker PolyLite ABS) | Recommended by Bambu Lab for its ABS |
| ASA (Prusament ASA) | 260 ± 5 °C | 110 ± 5 °C | 93 °C | 1.13 g/cm³ (Polymaker ASA) | Skirt or enclosure recommended |
| TPU 95A (Prusament TPU 95A) | 230 ± 10 °C | 65 ± 10 °C | 78.6 °C under 1.80 MPa | 1.22 g/cm³ (Polymaker TPU95) | Not required |
| Nylon (Prusament PA11) | 275 ± 10 °C | 100 ± 10 °C | 122.5 °C after annealing | 1.12 g/cm³ (Polymaker CoPA) | Required, 55 ± 5 °C chamber |
"Heat resistance" is the temperature figure each maker prints on its material page. Makers measure it in different ways, so treat it as a rough guide to which material softens first, not a design limit.
Sources
- Prusament PLA, Prusament PETG, Prusament ASA, Prusament TPU 95A and Prusament PA11 material pages: printer requirements and temperature resistance.
- eSUN ABS+ listing on Amazon UK: eSUN's comparison table gives ABS+ extruder and bed temperatures.
- Polymaker technical data at a glance: densities for every material in the table.
- Bambu Lab UK store: ABS: recommends an enclosed printer and good ventilation, and warns ABS may release styrene at printing temperatures.
All pages checked on 15 November 2026. For what each material is good for, read filament types explained and PLA vs PETG.
Embed this infographic
You are welcome to use this graphic on your own site if you keep the credit link. Copy the code below.
<a href="https://3dprinterguide.co.uk/infographics/filament-at-a-glance/"><img src="https://3dprinterguide.co.uk/assets/images/filament-at-a-glance-infographic.svg" alt="Infographic comparing six 3D printer filaments. PLA: nozzle 210 plus or minus 10 °C, bed 40 to 60 °C, heat resistance 55 °C. PETG: 250 plus or minus 10 °C, bed 80 plus or minus 10 °C, 68 °C. ABS+: 230 to 270 °C, bed 95 to 110 °C. ASA: 260 plus or minus 5 °C, bed 110 plus or minus 5 °C, 93 °C. TPU 95A: 230 plus or minus 10 °C, bed 65 plus or minus 10 °C. Nylon PA11: 275 plus or minus 10 °C, bed 100 plus or minus 10 °C, enclosure required. Sources listed on the graphic, checked 15 November 2026."></a><p>Infographic by <a href="https://3dprinterguide.co.uk/">3D Printer Guide</a></p>