3D Printer Guide
Knowledge base
A direct answer first, then the detail and the source. For the longer version, see the guides or the glossary.

Buying a printer
For most beginners, an FDM (filament) printer. Resin printers give finer detail for miniatures but add liquid resin, gloves, washing, curing and waste handling.
Shop noteBuying a printerCan the Bambu Lab A1 or A1 mini print ABS or ASA?Bambu Lab lists ABS, ASA, PC and nylon as not recommended on the A1 and A1 mini. Choose an enclosed printer the maker supports for those materials.
Shop noteBuying a printerWhat size 3D printer do I need?For most home users a build volume of about 180 mm is enough to start, and about 250 mm covers nearly everything. Larger objects can be printed in parts.
Shop noteBuying a printerWill I pay import VAT on a 3D printer ordered from abroad?Usually yes. GOV.UK says that for goods over £135 sent from outside the UK you pay VAT, and possibly Customs Duty, to the delivery company before you receive them.
Shop noteBuying a printerHow long is a 3D printer warranty in the UK?Often one year from the maker: Bambu Lab's UK store lists one year, Creality UK up to 12 months, and Prusa one year for UK buyers. Your statutory rights apply on top.
Costs
Less than you might think while printing PLA. Prusa states 80 W for the MK4S with PLA settings, which is about 2p an hour at Ofgem's 26.32p per kWh cap rate for October to December 2026.
Shop noteCostsHow many prints do I get from a 1 kg spool?Divide 1,000 g by the weight your slicer shows for the print. A 50 g part gives about 20 prints per kilo, before failures and leftovers.
Filament
Not always. New, vacuum-sealed PLA usually prints fine; dry it if you see popping, stringing or rough surfaces, and store opened spools sealed with desiccant.
Shop noteFilamentWhat temperature should I print PLA at?Use the range on your spool. Prusa lists 210 ± 10 °C at the nozzle and a 40–60 °C bed for Prusament PLA; Bambu Lab lists 190–230 °C and a 35–45 °C bed for its PLA Basic.
Shop noteFilamentIs PLA or PETG better for outdoor use?PETG, and ASA is better still in strong sun. Prusa gives PLA a 55 °C temperature resistance against 68 °C for PETG and 93 °C for UV-stable ASA.
Shop noteFilamentCan I use any brand of filament in my printer?Usually yes, if it is the right diameter (most printers use 1.75 mm) and a material your printer supports. RFID tags are a convenience on some printers, not a requirement.
Beginner help
Usually a dirty build plate, the nozzle set too high, the wrong bed temperature or surface for the material, or a draught. Clean the plate and re-run calibration first.
Shop noteBeginner helpWhich slicer should a beginner use?The one your printer's maker recommends: Bambu Studio for Bambu Lab, PrusaSlicer for Prusa. OrcaSlicer and UltiMaker Cura are good free alternatives once you are comfortable.
Shop noteBeginner helpCan I sell things I 3D print from downloaded models?Only if the model's licence allows it. Many free models use Creative Commons licences, and anything marked NC (NonCommercial) cannot be used for commercial purposes.
Safety
It is best avoided. Printers release ultrafine particles and vapours, so use a ventilated room you do not sleep in, choose PLA where possible, and never print while you sleep.
Shop noteSafetyCan I leave a 3D printer running overnight or while I'm out?We advise against it. A printer is a high-powered heating appliance; stay within earshot, fit a smoke alarm, and check it regularly, especially when it is new.