Knowledge base · Costs
How many prints do I get from a 1 kg spool?
Divide the spool weight by the print weight. Your slicer shows the estimated filament weight after you slice a model. A 50 g part gives about 20 prints from a 1 kg spool; a 10 g keyring gives about 100.
Allow for waste
You will not get every gram. Allow for failed prints, purging, test prints and the last few metres on the spool. Multi-colour prints can use much more filament than the part itself because of purging; see multi-colour 3D printing.
Length instead of weight
If your slicer shows metres, the length on a spool depends on density. eSUN states 350–355 m on a 1 kg spool of its PETG. Polymaker's technical data lists densities from about 1.04 to over 1.3 g/cm³ across its range, so a kilo of different materials holds different lengths.
Use the print cost calculator to convert length to grams and cost.
Sources
Opened and checked on 15 November 2026.