Guides · Filament
Filament spool sizes, cost per kilo and recycling spools
How filament is sold in the UK (1 kg spools, refills, multi-packs and mini spools), how to compare cost per kilo and per metre with prices checked on 15 November 2026, and what to do with empty spools and failed prints.

Filament looks simple to buy: a spool, a colour, a price. But spools come in different weights and formats, and the cheapest-looking listing is not always the cheapest per kilo. This guide explains the formats, shows how to compare prices properly, and covers what to do with empty spools.
Spool sizes and formats
- 1 kg spools are the standard for 1.75 mm filament from almost every mainstream brand. Every filament in our best PLA filament guide is sold as 1 kg.
- Smaller spools (for example 250 g or 500 g) are common for samples, speciality colours and expensive materials. Prusa lists a 500 g natural option for Prusament TPU 95A, for example. Bambu Lab includes 20 g sample coils with some printers.
- Multi-packs of 2–10 kg, sometimes in mixed colours, bring the price per kilo down.
- Refills are filament wound without a spool, sold to fit a reusable spool. Bambu Lab sells PLA Basic as "Refill" or "Filament with spool" on its UK store and says refill filament needs to be used with a spool.
- Cardboard spools are used by some brands. Elegoo's PLA listing describes a 1 kg cardboard spool.
Spool dimensions matter if you use a multi-colour feeder or a dryer. Sunlu's PLA listing gives its spool as 19.5 cm in diameter, 5.9 cm wide with a 6.3 cm hub hole; check your feeder or dryer's limits.

Comparing cost per kilo
Always convert to price per kilo: price ÷ kilograms. For example, on 15 November 2026:
| Product | Price | Weight | Price per kg |
|---|---|---|---|
| Bambu Lab PLA Basic, Bambu UK store (MSRP) | Around £13.99 | 1 kg | Around £13.99 |
| Bambu Lab PLA Basic, Bambu UK store (10+ rolls) | Around £8.39 each | 1 kg | Around £8.39 |
| Bambu Lab PLA Basic, Amazon UK | Around £24.70 | 1 kg | Around £24.70 |
| Elegoo PLA, Amazon UK | Around £11.39 | 1 kg | Around £11.39 |
| Polymaker PolyTerra PLA, Amazon UK | Around £16.25 | 1 kg | Around £16.25 |
| eSUN PETG, Amazon UK | Around £11.99 | 1 kg | Around £11.99 |
All prices in the table were checked 15 November 2026; sale prices change. The same product can cost very different amounts from different sellers, as the Bambu PLA rows show. Delivery terms also change the picture for single spools, so check the current threshold at checkout.
Comparing cost per metre
Slicers often show filament use in metres as well as grams. Length per kilo depends on density, so two "1 kg" spools of different materials hold different lengths:
- eSUN states 350–355 m on a 1 kg spool of its PETG.
- Polymaker's technical data table lists densities from 1.04 g/cm³ (PolyLite ABS) to 1.25 (PolyLite PETG) and higher for some PLAs, so a kilo of ABS goes further than a kilo of PETG.
Our print cost calculator converts a length in metres into grams using those densities, then works out cost.
Getting the most from each spool
- Store spools dry so the last 100 g is as good as the first. See storing and drying filament.
- Use up the ends. Small leftovers are ideal for test prints, small parts or the inside of multi-colour prints.
- Weigh a part-used spool on kitchen scales, subtract the empty spool's weight (weigh one when it is empty), and you know how much is left.
- Keep a note of colours and batches if you are printing a large project in one colour; colour can vary slightly between batches.
Recycling empty spools and failed prints
The recycling rules for 3D printing plastics vary by council and by material.
- Cardboard spools can often go with cardboard recycling, but check for glue, labels and any plastic parts first.
- Plastic spools: look for a recycling code moulded into the spool, then check whether your council accepts that plastic. If there is no code, ask the council or the filament maker before putting it in recycling.
- Failed prints and purge waste (the "poop" from multi-colour printing) are usually PLA, PETG or other plastics that household collections may not accept. Do not assume PLA is accepted in food or garden waste just because it is described as biodegradable or plant-based; check what your council's collection accepts.
- Reuse before recycling. A reusable spool plus refills cuts plastic waste. Some makers sell reusable spools (Bambu's UK store listed one with a discount when we checked), and empty spools can become cable reels or storage.
GOV.UK's recycling collections service lets you enter a postcode to find out what your council collects and how to recycle household waste. It covers England and Wales; councils in Scotland and Northern Ireland publish their own guidance.
Are cheaper multi-packs worth it?
They can be, if you will use the colours before the filament absorbs moisture. Buying ten spools you cannot store dry is a false economy.
What does "biodegradable PLA" mean for disposal?
Makers describe PLA as made from plant-based or biodegradable material. That does not mean it will break down in a home compost bin or that your council will collect it. Check your council's rules before putting it in any bin other than general waste.
Sources
Opened and checked on 15 November 2026.
- uk.store.bambulab.com/products/pla-basic-filament
- Amazon UK listing: Bambu Lab PLA Basic 1.75 mm, 1000 grams, Sunflower Yellow
- Amazon UK listing: ELEGOO PLA Filament 1.75mm Black 1KG
- Amazon UK listing: SUNLU PLA Filament 1.75mm Black PLA 1KG
- Amazon UK listing: eSUN PETG 3D Printing Filament 1.75mm, 1KG Spool, Solid Black
- Amazon UK listing: Polymaker PolyTerra PLA Army Dark Green - 1.75mm - 1kg
- prusament.com/materials/prusament-tpu-95a/
- wiki.polymaker.com/polymaker-products/polymaker-filaments/technical-data-at-a-glance
- www.gov.uk/recycling-collections