Costs · Tool

3D print cost calculator

Work out the filament and electricity cost of a 3D print, per print and per part, from your spool price, part weight or length, print time, printer power draw and electricity unit rate.

By the 3D Printer Guide teamChecked

A finished 3D printed part on a scale next to a spool of filament, a calculator and a plug-in power meter.
AI-generated editorial illustration

This calculator adds up the two running costs you can measure for a single print: the filament it uses and the electricity the printer draws while it runs. It does not include the printer's purchase price, spare nozzles, build plates or your time. Read the part weight and print time from your slicer's summary after you slice the model.

Indicative only. Every prefilled value is a user-editable example, not a quote or a claim about a typical print. The answer is arithmetic on the figures you type. Real power draw varies with bed temperature, room temperature and enclosure, and your electricity tariff may differ from the price cap figure. Check your own bill and, if you can, measure the printer with a plug-in energy monitor.

Filament

Editable example: Bambu Lab PLA Basic, 1 kg, around £13.99 MSRP on the Bambu Lab UK store (checked 15 November 2026; sale prices change). The same page showed bulk pricing around £8.39 a roll for 10 or more. Replace both fields with your own spool's price and net filament weight.

How much the part uses

The 50 g and 17.8 m values are examples only, not a typical print. Slicers such as Bambu Studio, PrusaSlicer, OrcaSlicer and Cura show both figures after slicing.

Time and power

Editable power example: Prusa lists the Original Prusa MK4S's power consumption as 80 W with PLA settings and 120 W with ABS settings on its MK4S product page (checked 15 November 2026). Editable unit-rate example: 26.32p per kWh, Ofgem's average electricity price cap unit rate for Direct Debit customers in England, Scotland and Wales, 1 October to 31 December 2026, from Ofgem's unit rates page (checked 15 November 2026). The 3-hour time, one part and 0% failure allowance are examples.

Press Calculate to see the cost. With the example values, 50 g of PLA at £13.99 per kg plus 3 hours at 80 W and 26.32p per kWh comes to about £0.76.

How the sum works

  1. Price per gram = spool price ÷ grams on the spool. £13.99 ÷ 1,000 g = about 1.4p per gram.
  2. Grams from length (if you entered metres) = length in cm × π × (diameter in cm ÷ 2)² × density in g/cm³. For 1.75 mm PLA at 1.17 g/cm³ that is about 2.81 g per metre, so 17.8 m is about 50 g. Densities vary by brand and colour; Polymaker's own PLA family ranges from 1.17 to 1.37 g/cm³ in its table, so check your maker's data sheet if you need precision.
  3. Filament cost = grams used × price per gram. 50 g × 1.4p = about £0.70.
  4. Electricity = watts ÷ 1,000 × hours × pence per kWh. 80 W for 3 hours = 0.24 kWh; at 26.32p that is about 6.3p.
  5. Total = (filament + electricity) × (1 + failure allowance). Per part = total ÷ parts on the plate.

Where the starting figures come from

FigureValueSource (checked 15 November 2026)
Electricity unit rate26.32p per kWhOfgem: energy price cap unit rates, 1 October to 31 December 2026, average for Direct Debit in England, Scotland and Wales. Ofgem notes there is no VAT on electricity from 1 October 2026 to 31 March 2027. Your region and payment method change the figure.
Printer power, PLA80 WPrusa: Original Prusa MK4S, power consumption with PLA settings (120 W with ABS settings).
Printer power, enclosed example90 WPrusa: CORE One+, power consumption with PLA settings (110 W with ABS settings).
Example spool priceAround £13.99 per 1 kgBambu Lab UK store: PLA Basic, MSRP including VAT, checked 15 November 2026; sale prices change.
Density, PLA1.17 g/cm³Polymaker PolyLite PLA, Polymaker technical data table
Density, PETG1.25 g/cm³Polymaker PolyLite PETG, Polymaker technical data table
Density, ABS1.04 g/cm³Polymaker PolyLite ABS, Polymaker technical data table
Density, ASA1.13 g/cm³Polymaker ASA, Polymaker technical data table
Density, TPU 95A1.22 g/cm³Polymaker PolyFlex TPU95, Polymaker technical data table
Density, Nylon (PA)1.12 g/cm³Polymaker PolyMide CoPA, Polymaker technical data table

Do not type a power supply rating as the average draw. For example, Bambu Lab lists the P1S's electrical requirement as 1000 W at 220 V on its UK store page, and Elegoo lists the Centauri Carbon 2's rated power as 1100 W at 220 V on its UK store page. Those are maximum ratings, not what the printer uses on average through a PLA print, which is why the default here is a maker's stated average with PLA settings. A plug-in energy monitor gives you a real figure for your own printer.

For the bigger picture, including printer prices and filament cost per kilo, read what 3D printing really costs in the UK. To see how filament prices compare, read spool sizes, cost per kilo and recycling.