Knowledge base ยท Beginner help

Which slicer should a beginner use?

By the 3D Printer Guide teamChecked

Start with the slicer your printer's maker recommends, because it has tuned profiles for your exact machine.

  • Bambu Lab printers: Bambu Studio, open source (AGPL-3.0) and based on PrusaSlicer.
  • Prusa printers: PrusaSlicer, which Prusa describes as free, open source and needing no account, with Simple, Advanced and Expert modes.
  • Other brands: the maker's own slicer, or OrcaSlicer, a community slicer with profiles for many printers.
  • Also popular: UltiMaker Cura, free, with an open-source engine and more than 400 settings.

Once you are comfortable, try another slicer if you need a specific feature. Keep notes, because profiles do not always transfer between slicers.

More in slicers and where to find models.

Sources

Opened and checked on 15 November 2026.