Knowledge base · Safety
Is it safe to run a 3D printer in a bedroom?
It is best avoided. A room you sleep in is the room where you spend the most hours breathing the air, and FDM printers give off ultrafine particles and vapours while they print.
What the sources say
- UL Research Institutes' emissions research summary says emissions depend on the filament and print conditions, lists nylon, ASA, ABS and HIPS among high emitters, and says exposure may exceed recommended limits.
- The University of Edinburgh's 3D printer guidance, based on HSE research, recommends PLA wherever possible and reports that a filtered enclosing hood cut particle emissions to the room by 97–99% in HSE laboratory work.
If a bedroom is the only space
Print PLA only, open a window while printing, keep the door open, leave the room while it runs, and never print while you are asleep. The London Fire Brigade's electrical items advice also applies: one plug per socket for high-powered appliances, and watch for hot plugs or scorch marks.
Read the full 3D printer safety guide.
Sources
Opened and checked on 15 November 2026.