Affiliate links: some links on this page go to Amazon UK. As an Amazon Associate we earn from qualifying purchases. You do not pay more, and it does not change what we write. How this works.

Knowledge base · Filament

What temperature should I print PLA at?

By the 3D Printer Guide teamChecked

Use the range printed on your spool, starting in the middle. Makers' figures for PLA are similar but not identical:

PLANozzleBed
Prusament PLA210 ± 10 °C40–60 °C
Bambu Lab PLA Basic190–230 °C35–45 °C
Polymaker PolyTerra PLA190–230 °CNot stated on the listing we read

Fine-tuning

  • Too cold: weak layers, under-extrusion, a rough surface.
  • Too hot: stringing, droopy overhangs, blobs.
  • Faster printing usually needs the hotter end of the range.

Your slicer's filament profile for your printer is usually a good start. Prusa runs the part cooling fan at 100% for PLA.

See filament types explained and the filament infographic.

Sources

Opened and checked on 15 November 2026.