Knowledge base ยท Filament
Can I use any brand of filament in my printer?
Usually, yes, as long as it is the right diameter and a material your printer supports.
Check three things
- Diameter. Most current desktop printers use 1.75 mm. Prusa lists 1.75 mm for the MK4S.
- Material. Check the maker's supported list. Bambu lists ABS, ASA and nylon as not recommended on the A1.
- Spool size, if you use a multi-colour feeder or dryer. Sunlu, for example, gives its PLA spool as 19.5 cm across and 5.9 cm wide with a 6.3 cm hub hole.
RFID tags
Some makers' own filament carries an RFID tag the printer reads automatically. Bambu Lab's PLA Basic is one. With other brands you set the material in the slicer or on the printer instead.
Warranty
Read your printer's warranty terms. Damage from a material the maker says is unsupported may not be covered.
See best PLA filament UK.
Sources
Opened and checked on 15 November 2026.